Minifill-E

Minifill-E wall mounted Pressurisation Units from ELCO are  designed to automatically top up and maintain the minimum pressure requirements of modern low/medium temperature sealed heating, cooling and chilled water systems. A pumped pressurisation unit also removes the need for cold water header tanks with associated pipe work, or eliminates reliance on mains pressure to provide the system head. Minifill wall mounted models are single pump only, with the option of electro-mechanical or electronic controls. The floor standing twin (duty/standby) pump model is available with electronic controls only.

Electronic versions utilise a 16 character back lit LCD display and keypad for viewing operation and system information.

  • Class AF air gap and overflow
  • Float valve with low level switch in break tank
  • Single pump
  • Pump kick function
  • Micro-processor control
  • 16 character back-lit LCD display
  • Simple key pad operation
  • Self diagnostic interrogation
  • Pressure transducer
  • Additional volt free contact
ModelMinifill – E
Unit typeWall mounted
Single pump
Electronic
Cold fill pressure range0.8 - 3.0 bar
Power supply
230v 1 Ph 50Hz
Full load current2.8A
Start current9.0A
Fuse rating10.0A
Noise level58dBA @ 1 metre
Break tank air gapType AF
Weight empty / full21/28.6 kg
Water inlet connection1/2” BSP male
Overflow connection32mm plastic
System connection15mm compression
Electrical connection4 x 10mm glands